RESEARCH ARTICLE
Correlations Among Various Self-Consolidating Concrete Workability Responses
Wu-Jian Long*, 1, Kamal Henri Khayat2, Feng Xing1
Article Information
Identifiers and Pagination:
Year: 2012Volume: 6
First Page: 38
Last Page: 47
Publisher ID: TOCIEJ-6-38
DOI: 10.2174/1874149501206010038
Article History:
Received Date: 15/11/2011Revision Received Date: 30/11/2011
Acceptance Date: 15/12/2011
Electronic publication date: 22/3/2012
Collection year: 2012
open-access license: This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0), a copy of which is available at: https://creativecommons.org/licenses/by/4.0/legalcode. This license permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Abstract
Self-consolidating concrete (SCC) mixtures designated for precast, prestressed applications should be highly workable to flow easily through restricted spacing and completely encapsulate reinforcements without any mechanical vibration. Key workability characteristics of SCC can be described in terms of filling ability, passing ability, and resistance to segregation. These properties are typically characterized by data that relate to specific testing methods. In general, these methods include the components required for evaluating simultaneously filling ability, passing ability, and resistance to segregation, since these properties are rather interrelated. In this investigation, 33 SCC mixtures made with various mixture proportioning parameters, including maximum size and type of aggregate, type and content of binder, and w/cm were evaluated. The mixtures were prepared using crushed aggregate and gravel of three different nominal sizes, w/cm of 0.33 and 0.38, and three binder compositions: Type MS cement, Type HE cement with 30% of slag replacement, and Type HE cement with 20% of Class F fly ash. Comparisons and correlations among various test results used in evaluating the workability responses obtained for these mixtures are established. This is done to highlight advantages and limitations of the various test methods that can be used to assess workability of SCC designated for prestressed applications. Appropriate combinations of test methods that can be used to assess workability of SCC at the precast plant are recommended, and ranges of acceptance of the various test methods are established.
