RESEARCH ARTICLE


A Computer Method for Rapid Design of Composite Steel-concrete Cross-sections



Cosmin G. Chiorean*
Technical University of Cluj-Napoca, Faculty of Civil Engineering, 15 C Daicoviciu Str., 400020, Cluj-Napoca, Romania.


Article Metrics

CrossRef Citations:
0
Total Statistics:

Full-Text HTML Views: 403
Abstract HTML Views: 646
PDF Downloads: 432
Total Views/Downloads: 1481
Unique Statistics:

Full-Text HTML Views: 245
Abstract HTML Views: 381
PDF Downloads: 333
Total Views/Downloads: 959



Creative Commons License
© 2013 Cosmin G. Chiorean;

open-access license: This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0), a copy of which is available at: https://creativecommons.org/licenses/by/4.0/legalcode. This license permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

* Address correspondence to this author at the Technical University of Cluj-Napoca, Faculty of Civil Engineering, 15 C Daicoviciu Str., 400020, Cluj-Napoca, Romania; Tel/Fax.:+40264594967; E-mail: cosmin.chiorean@mecon.utcluj.ro


Abstract

This paper presents an efficient numerical procedure for the rapid design of arbitrary-shaped composite steel-concrete cross-sections that are subjected to biaxial bending and axial force. The design procedure allows cross-sections to be designed by solving directly for the reinforcement required to provide a cross-section with adequate strength. The new numerical procedure developed in this paper shows very good stability in the presence of strain softening effect exhibited by the concrete in compression and tension and convergence stability is not affected by the shape of stress-strain relation-ships of concrete, the type and amount of reinforcements or the residual stress distribution in encased steel elements. A computer program was developed, aimed at obtaining the ultimate strength capacity and reinforcement required by rein-forced and composite cross-sections subjected to combined biaxial bending and axial load. In order to illustrate the pro-posed method and its accuracy and efficiency, this program was used to study several representative examples, which have been studied previously by other researchers. The examples run and the comparisons made prove the effectiveness of the proposed numerical procedure.

Keywords: Rapid design, Interaction diagrams, Composite cross-sections, Residual stresses, Ultimate strength analysis, Biaxial bending.