RESEARCH ARTICLE


Investigation of Developed Thermal Forces in Long Concrete Frame Structures



Mustafa K. Badrah, Mansour N. Jadid1, *, 2
1 Faculty of Civil Engineering, University of Aleppo, Aleppo, Syria
2 Department of Building Science and Technology, University of Dammam, Saudi Arabia


Article Metrics

CrossRef Citations:
3
Total Statistics:

Full-Text HTML Views: 367
Abstract HTML Views: 293
PDF Downloads: 324
Total Views/Downloads: 984
Unique Statistics:

Full-Text HTML Views: 272
Abstract HTML Views: 216
PDF Downloads: 264
Total Views/Downloads: 752



Creative Commons License
© 2013 Badrah and Jadid;

open-access license: This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0), a copy of which is available at: https://creativecommons.org/licenses/by/4.0/legalcode. This license permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

* Address correspondence to this author at the P. O. Box 30973, Al-Khobar 31952, University of Dammam, Dammam, Saudi Arabia; Tel: 00966505873655; Fax: 00966135550135; E-mail: mnjadid@yahoo.com


Abstract

The objectives of this paper are to review the modeling and design of concrete frame structures for the changing member-temperature loading case and the section gradient-temperature loading case. In addition, the intensity distribution of internal forces resulting from temperature changes and the factors that cause a decrease or increase in these forces was studied. When the temperature of an object changes positively or negatively, its length increases or decreases according to basic physical laws. If an object subjected to temperature change is restrained, internal compression or tension forces are created. Using temperature equations in a finite element structural analysis software package, deformation and internal forces were calculated for 2-D and 3-D frame buildings. In the member-temperature change loading case, conclusions were reached that no matter how high the structure is, only members such as beams and columns on the lowest two stories are substantially affected, but the greater the length or width of the structure, the greater are the force values on the affected members. In the section gradient-temperature loading case, it was observed that the most affected members were the beams on the upper two levels in addition to the facade columns; however, the output forces and moment values were small and sometimes negligible.

Keywords: Frame structures, reinforced concrete, member-temperature loading, section-gradient loading, thermal effects, thermal loading.