RESEARCH ARTICLE
Seismic Behavior of Medium and High Strength Concrete Buildings
J.M. Bairán, R. Moreno-González*, J. Peguero
Article Information
Identifiers and Pagination:
Year: 2015Volume: 9
First Page: 308
Last Page: 320
Publisher ID: TOCIEJ-9-308
DOI: 10.2174/1874149501509010308
Article History:
Received Date: 14/10/2014Revision Received Date: 12/11/2014
Acceptance Date: 12/11/2014
Electronic publication date: 28/5/2015
Collection year: 2015
open-access license: This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0), a copy of which is available at: https://creativecommons.org/licenses/by/4.0/legalcode. This license permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Abstract
Current concrete technology has made higher concrete grades more affordable to mid and high-rise buildings; hence its use has been increasing in the late years as it allows for smaller cross-sections, reduction of the structure’s weight, improve durability, among other benefits. However, it is known that brittleness of plain concrete increases with the strength; therefore, some national codes have limited the concrete’s strength in high seismic zones.
In this paper, the seismic behavior of a 10 storey dual frame-wall building, designed with concrete grades C30, C60 and C90 is studied in order to assess the advantages and disadvantages of this material and investigate the effects of high concrete strength on the seismic behavior of buildings. In total, three models were studied. Furthermore, a comparison between Force-Based-Design (FBD) and Displacement-Based-Design (DBD) methodologies is made. DBD showed advantages in determining the adequate design ductility and the distribution of forces between frame and wall.
The structures are designed according to Eurocode 8 for seismic design high ductility structures. To assess the seismic performance of the building, pushover analyses were made according to the Eurocode 8 (N2 method) in order to determine the performance point.
It is observed that adequate design could accommodate concrete’s reduction of ductility. Needed confinement levels can objectively be defined for different concrete strength. Some benefits of the overall increase of strength are highlighted in the paper. The C90 building showed adequate response, although changes on the failure mode were observed.