RESEARCH ARTICLE


Finite Element Analysis on Tensile Stiffness of Cold-Formed Steel Bolted Connections



Bo Cheng*, Zhenyu Wu
School of Civil Engineering, Harbin Institute of Technology, Harbin, Heilongjiang, 150090, P.R. China.


Article Metrics

CrossRef Citations:
0
Total Statistics:

Full-Text HTML Views: 399
Abstract HTML Views: 851
PDF Downloads: 386
Total Views/Downloads: 1636
Unique Statistics:

Full-Text HTML Views: 242
Abstract HTML Views: 559
PDF Downloads: 295
Total Views/Downloads: 1096



Creative Commons License
© 2015 Cheng and Wu;

open-access license: This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0), a copy of which is available at: https://creativecommons.org/licenses/by/4.0/legalcode. This license permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

* Address correspondence to this author at the School of Civil Engineering, Harbin Institute of Technology, Harbin, Heilongjiang, 150090, P.R. China; E-mail: chengbo198508@126.com


Abstract

This paper presents a finite element analysis on the tensile stiffness of steel bolted connections which are fabricated from thin-walled cold-formed steel strips and their members. This type of bolted connection is usually used to assemble the diagonal bracing member in the light steel structure. Unlike the architectural steel structure, thin walled steel bolted connection cannot be simplified into a hinge joint due to the weak tensile stiffness of connection. The calculation of tensile stiffness of bolted connection is necessary to accurately evaluate the effectiveness of bracing system in the coldformed steel structure. Based on the existing test results and analysis results, finite element (FE) models with threedimensional solid elements were established to investigate the tensile stiffness of bolted connections between cold-formed steel plates under shear. The analysis with non-linear material and contact elements was carried out in order to predict the load-displacement relationships of bolted connections. Furthermore, a parametric study on single-bolted or two-bolted connections with different configurations was performed to study the relationship of connection tensile stiffness and structural parameters such as bolt diameter, plate thickness and steel yield strength. According to the stiffness results obtained from parametric study, six calculating equations for practical design of cold-formed steel bolted connection have been proposed. The calculation results of the stiffness equations are in a good correlation with those of FE analysis, and the proposed equations have been found to provide estimates of tensile stiffness of bolted connections with reasonable accuracy.

Keywords: Bolted connection, cold-formed steel, tensile stiffness, finite element analysis, calculating equation, parametric study.